A trial erection

So we reach the point where we can see if it looks like it will fit together. The engine is makes a lot of use of jigs, something new to me, but you can see how they work.

So firstly the front columns are clamped to an assembly jig located in the main bearing slots. Then a jig to locate the lower covers of the cylinders is clamped to the slideways,  then the whole cylinder block is lowered onto these covers – and you start to get a feel for how it’s going to look! and how heavy it is!

first erection - LP valve end
first erection – LP valve end

from the rearfrom the rear… and from the HP endfrom the HP end

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s