- BOOK & NEW (not sure about ME) – The suspension hole is shown as being 1.125 inches (1 1/8″) to the left of the left-hand expansion rod hole.
This dimension is too small – measuring from the drawing and layout on the steel suggest this should be 1.375 (1 3/8″) Submitted by Malcolm D…Correction – the problem was my reading of the drawings… the slot is dimensioned as 4.25″ and I assumed this was between the centres of the end radiuses, and it’s not, it’s the extent of the slot, so with this change I suspect that the original hole location would work – but I will say measuring from the drawing (yes I know that’s wrong) it does not appear to be 1.125! – re-Submitted M Duckett 😦
Expansion Link Part 17
Leave a reply
SY Befur 