Tag Archives: impulse valve

The Impulse Valve (Simpling Valve)

I have puzzled over the drawings of the Impulse Valve for a year or more, and spoken to others who can make no sense of it.

Well finally last week while mulling the design over with a friend, he (I think) correctly fathomed how it is meant to be built and operate…

As drawn there appears to be a plunger in a tube which is operated by a press button. There appears to be no way that this would operate, as it would just admit HP steam to the chamber formed between this plunger and the end of the valve body….

The explanation is that this plunger is in fact a tube! Thus when depressed the steam is admitted to the end of the valve assembly, and then passes down the tube to the valve chest/cylinder. There are hints in the drawing that this is the game, but some of the views are incorrectly drawn which leads to the confusion – and actually I am not even sure it could be reliably constructed as drawn.

I think it would still be hard to make this valve steam tight, but in operation this might not be a practical problem…. Thanks to Neil Davis for figuring this out!

*Simpling or Impulse

In the ME words, Mr. Leak complains that many people incorrectly describe the Impulse Valve as a “Simpling Valve”, and he argues that this is wrong as it does not make the engine run as a simple (which is true) but just introduces a HP steam feed into the LP valve chamber to push the engine off HP TDC if it stops there.

He’s right in the description of what it does, but knowledgeable friends of mine tell me that within the road steam community (Traction Engines) these valves on compounds are always known as “Simpling Valves”… so maybe we can continue to use the term…