Well this months thanks go to Nigel Thompson from the SBA who noticed signs of wavering and procrastination in my questioning about the sequence of build operations, and stepped in to put me back on the right track….
To go back a bit; you might recall that the game plan is to clad the hull outside and in with epoxy/cloth skins. Also we need to add the “keel” (aka “deadwood”) to the bottom of the boat after cladding, and the question was do we clad the out side, then fit the keel/propshaft/rudder etc. then turn her over and clad the inside? or do we clad the outside, turn her over and clad the inside then turn her over and fit the keel and then turn her a third time or some other combination of things…. In the middle of this agonising it was suggested by others that the internal and external cladding need to be done in one season to stop the timber “shrinking away from the cladding” due to changes of humidity in the (half-clad) timber…. and then there is a land-rover chassis sitting waiting to be mated to my winter transport and then there are holidays and bike tours in France and then…… At this point the aforementioned Nigel stepped in and said “common lets get moving I’ll come next week and help with the cladding”. and so it was to be….. Continue reading